塑料彎板的注射模具設計及成形工藝-注塑模含8張CAD圖帶卡片

塑料彎板的注射模具設計及成形工藝-注塑模含8張CAD圖帶卡片,塑料,注射,模具設計,成形,工藝,注塑,cad,卡片 摘 要 我們以社會實際產品為課題，設計一套能夠生產所給塑件、結構合理、能保證制品的精度、表面質量的塑料模具，能熟練使用UG、CAD繪圖。使我們在塑件結構設計、塑料成型工藝分析、塑料模具數字化設計、塑料模具零件的選材、熱處理、塑料模具零件的制造，以及資料檢索、英文翻譯等方面獲得綜合訓練，為縮短工作適應期奠定堅實的基礎本設計的重點內容有以下幾點：（1）要明確塑件設計要求：仔細閱讀塑件制品零件圖，從制品的塑料品種，塑件形狀，尺寸精度，表面粗糙度等各方面考慮注塑成型工藝的可行性和經濟性，必要時，要與產品設計者探討塑件的材料種類與結構修改的可能性。（2）運用UG及CAD軟件完成模具設計：分型面應選在塑件外形最大輪廓處，滿足塑件的外觀質量要求。（3）模具結構設計：塑件成型位置及分型面選擇；模具型腔數的確定，型腔的排列和流道布局以及澆口位置設置；模具工作零件的結構設計；頂出機構設計；排氣方式設計。（4）模具總體尺寸的確定和選購模架：模架已逐漸標準化，選定模架，在以上模具零部件設計基礎上初步繪出模具的完整結構圖。（5）模具結構總裝圖和零件工作圖的繪制：模具總圖繪制必須符合機械制圖國家標準，模具總裝圖應該包括必要尺寸，如模具閉合尺寸，外形尺寸，特征尺寸，裝配尺寸，極限尺寸及技術條件，編寫零件明細表等。 關鍵詞：ABS；彎板；注射模具；推板機構；薄壁塑件；模具設計 Plastic bending plate injection molding process and mold design Abstract We take the actual product of society as the subject, design a set of production for plastic parts, reasonable structure, can guarantee the precision plastic mold, the surface quality of the products, able to skillfully use PROE, CAD/CAM mapping, CAE analysis software. We make the plastic parts in the structure design, plastic molding process analysis, plastic mold, plastic mold parts of the digital design and material selection, heat treatment, plastic mold manufacturing, comprehensive training and information retrieval, English translation and so on, in order to shorten the work period to lay a solid foundation for the design of the main content is as follows: (1) to clear plastic parts design requirements: read the product parts, products from plastic, plastic parts shape, size precision, considering the feasibility and economy of the injection molding process of all aspects of the surface roughness when necessary, to explore the possibility of modifying the material type and structure of plastic parts and products the designer. (2) using UG and CAD software to complete the mold design: parting surface should be in shape to meet the requirements of maximum contour, the appearance quality of plastic parts. (3) die structure design: molding position and parting surface selection; determine the mold cavity number, cavity arrangement and runner layout and gate location design; structure design of die parts; ejection mechanism design; exhaust system design. (4) to determine the overall size of the mold and the selection of mold: mold has been gradually standardized, the selected frame, complete structure design based on the above preliminary draw mold parts mold. (5) drawing die assembly drawing and parts drawing: drawing die drawing must comply with the national standard of mechanical drawing, mold assembly drawings should include the necessary dimensions, such as the closed mold size, shape size, feature size, assembly size, limit the size and technical conditions, preparation of parts list etc.. Key words: ABS warp, injection mold, push plate mechanism, thin wall plastic parts, mold design