中鉸鏈墊片級進模設計【連接片】【沖孔落料級進?!俊菊f(shuō)明書+CAD】,連接片,沖孔落料級進模,說明書+CAD,中鉸鏈墊片級進模設計【連接片】【沖孔落料級進?!俊菊f(shuō)明書+CAD】,鉸鏈,墊片,級進模,設計,連接,沖孔,落料級進模,說明書,仿單,cad
河南機電高等專科學校
畢業設計開題報告
學生姓名: 學 號:
專 業: 模具設計與制造
設計(論文)題目: 中鉸鏈墊片級進模
指導教師:
2006年4月6日
(中鉸鏈墊片級進模設計)
摘要
以中鉸鏈墊片零件為例,結合其模具設計特有工藝性,進行了工藝性分析,并分析了成形過程的三種不同的沖壓工藝方案,從理論探討及實驗上提出了最佳工藝方案。介紹了模具設計要點、結構分析、工作原理;并對模具的各部分主要尺寸進行理論運算,以確定各沖模的尺寸;對沖裁模從設計到零部件的加工工藝以及裝配工藝等進行了詳細闡述,簡要分析了模具關鍵零部件的設計及加工工藝。實踐證明,模具結構能很好地滿足零件的精度要求,不僅模具結構左右對稱,而且受力均勻。
關鍵詞:中鉸鏈墊片 工藝性分析 沖裁模 裝配工藝
The screen screen board work piece cold ramming
mold design
Abstract
Taking wind machine hood as an instans,combining with its special of die design,the process analysis ,and three kinds of different stamping technique plans were analyzed, optimal processing plan and feasible forming die were obtained according to theoretical analysis and experiment. The critical points of die design are introduced, the theoretical calculation to the main dimensions of die are carried out so as to determine the size of different punching dies; the die design and the process of parts as well as the assembling process and drawing die are stated in details,the design and manufacture process of the key part of the die were also discussed in brief. Practical application showed,that the die structure could meet the require meet the spare parts accuracy ,not only are the die structure symmetrical,but also force condition.
Key words: wind machine hood processing analysis drawing die assembling process
鏈接地址:http://m.kudomayuko.com/article/20914388.html