車載輪椅升降機設計【說明書+CAD+SOLIDWORKS】

車載輪椅升降機設計【說明書+CAD+SOLIDWORKS】,說明書+CAD+SOLIDWORKS,車載輪椅升降機設計【說明書+CAD+SOLIDWORKS】,車載,輪椅,升降機,設計,說明書,仿單,cad,solidworks 附錄A Lifts optimization design Cars with glass lifts is key to guide gibs problem. Guide gibs function is to make window glass up and down movement, can in vertical, front and back, the or so direction assurance guidance; General use metal, leather, felt or rubber is made. The above test method although considered the guide friction factors, but DuoZhong and all kinds of automobile glass lifts the actual trajectory there are still differences, a lack of corresponding conversion method. Such as xiali, mai hing industrial vehicle glass lifts, its lifting movement track are big radius arc (R1250mm. 2500 mm). Xiali car window of installed in lifting arm brackets, the window in lifting movement, is to use the groove and roll in the bracket the axial clearance, to constantly adjust Angle brackets, in order to adapt to the window glass in the guide groove movement up and down, so the actual working condition and test on the stage of the simulation working condition is showed in the. In order to make the test requirements close to the actual working condition, through the nearly sample comparative experiments, the statistics and analysis, find the suitable correlation coefficient, is the production of all kinds of glass lifts to all kinds of models of the door, that ensure the match door window product performance, also improve the quality of the test bed of practical value. Because arm type glass lifts manufacturing process relatively simple, low cost, at present our country about 80% of the automobile glass lifts the arm type glass lifts. And soft type glass lifts from stability and resistance movement is much better than the former more compact structure, and the installation and layout are more convenient, but at present our country about soft type lifts, there is no formal national standards. Soft shaft type glass lifts in the world of high-grade vehicle especially cars has been used in great quantities, it is a more advanced glass lifts. In recent years the introduction of domestic automobile products, such as the truck, Beijing, nanjing Cherokee and tell YiWeiKe provided by the lifter. At present some domestic auto parts factory has in such as Beijing automobile glass lifts factory, nac accessory tools factory, sichuan car factory accessories factory completed the soft shaft type glass lifts production technology of technological development (introduction), can provide the product localization. With its low value-added production level, can also be used to replace arm type glass lifts. As the car structure layout design, manufacturing cost, manufacturing technology, the requirements of the manual push-pull type window of adjusting mechanism for many still vehicle in use. At present the arm type and manual (mechanical) glass lifts as the main use the type, the gentle type glass lifts is limited to introduce the application of the model, and electricity-powered glass lifts application is less. Electric glass lifts in foreign high-grade car is very normal, due to the application of the complicated structure, and high cost, and domestic small motor performance instability, the products in our country at present is used in automobile products is less. Can foresee, along with the car design, manufacturing level enhancement, electric glass lifts will more and more application in automobile products. Glass lifts the door system of the door is the attachment. Glass lifts is to realize the car door glass doors accessories lifting movement. Through the glass lifts drive glass bracket for up and down movement, thus make the glass door window frame of door along the guide groove or guide for lifting movement. The common glass lifts main has a fork arm type transmission and rope wheel drive two common form. The latter can adapt to the glass in the big curvature of the surface movement and arc. In addition there is a hand control type two kinds of control ways he electric. The door design and layout. Proper selection and arrangement glass lifts is to guarantee the glass lift control light and reliable work of the key. As the door system of moving parts, lifts and body not only of the layout related internal and external board, at the same time also and the door both sides of guide rail and glass of water cut, sealed inside and outside the door, even have a certain correlation and speakers. In the door system especially inside and outside door plank and glass shape after confirmation, need to be in preliminary based on the door system and glass lifts associated parts layout and analysis. At the same time in the leg levelers mathematical model (CAD) before building also need on the door system and the mutual relationship between nt together.this may and related mechanical analysis. 附錄B 升降器優化 汽車用玻璃升降器的關鍵是導向槽問題。導向槽的功能是使車窗玻璃上下運動時，能在垂直、前后及左右方向上保證導向作用；一般用金屬、毛氈或橡膠制成。上述試驗方法雖然考慮了導軌摩擦等多種因素，但與各種汽車用玻璃升降器的實際運動軌跡仍有差異，也缺少相應的換算方法。如夏利、華利車用玻璃升降器，其升降運動軌跡均為大半徑圓弧(R1250mm．2500mm)。夏利車的車窗玻璃安裝在舉升臂托架上，車窗玻璃在升降運動中，是利用托架內的凹槽與滾輪軸軸向間隙，來不斷調整托架角度，以適應車窗玻璃在導向槽內的上下運動，因此實際工況與試驗臺上模擬的工況是有出入的。為了使試驗要求貼近實際工況，通過近百個樣件的對比試驗，采用統計與分析方法，找到了適宜的相關系數，是生產的各種玻璃升降器能與各種車型的車門門窗匹配，即保證了產品性能質量，也提高了試驗臺的實用價值。 由于臂式玻璃升降器制造工藝相對簡單，成本低，目前我國80％左右的汽車玻璃升降器采用臂式玻璃升降器。而柔式玻璃升降器從平穩性、運動阻力來說大大優于前者結構更緊湊，且安裝和布置都較為方便，但目前我國關于柔式升降器尚無正式的國家標準。 軟軸式玻璃升降器在世界各種中高檔車輛特別是轎車上已被大量采用，是一種比較先進的玻璃升降器。近年來國內的引進汽車產品，如重汽斯泰爾、北京切諾基和南京依維柯等均采用這種升降器。目前已在國內一些汽配廠如北京汽車玻璃升降器廠、南汽隨車工具廠、四川汽車廠附件廠等完成了有關軟軸式玻璃升降器的生產工藝的技術開發(引進)，可提供國產化產品。隨著其批量化生產水平的提高，亦可用于替代臂式玻璃升降器。 由于汽車結構布局設計、制造成本、制造技術的要求，手動推拉式的車窗調整機構仍為許多車輛采用。目前臂式及手動(機械式)玻璃升降器為主要使用類型，柔式玻璃升降器的應用尚限于引進車型，而電動式玻璃升降器應用較少。 電動玻璃升降器在國外中高檔車上應用已很普通，由于其結構復雜、成本高、且國內小型電機產品性能不穩定，故目前在我國汽車產品中應用尚少?？梢灶A(yù)見，隨著我國汽車設計、制造水平的提高，電動玻璃升降器將越來越多地應用于汽車產品。 玻璃升降器是車門系統中的車門附件。玻璃升降器是實現轎車車門玻璃升降運動的車門附件。通過玻璃升降器帶動玻璃托架作上下運動，從而使得車門玻璃沿著車門窗框的導槽或?qū)к壸魃颠\(yùn)動。目前常用的玻璃升降器主要有叉臂式傳動和繩輪式傳動兩種常見結構型式。后者能夠適應玻璃在大曲率的弧形升降面上移動。此外有手操縱式卒電動兩種操縱方式。車門設計和布局中．正確選擇和布置玻璃升降器是保證玻璃升降操縱輕便、工作可靠的關鍵。 作為車門系統中的運動部件，升降器不僅僅和車身內外板的空間布局相關，同時也和車門兩側導軌、玻璃內外水切、密封條、門鎖甚至和揚聲器都有一定關聯。在車門系統特別是內外門板和玻璃形狀初步確認后，需要在基于車門系統和玻璃升降器相關聯部件進行布局和分析。與此同時在升降器數學模型(CAD)構建之前也需要對車門系統和升降器之間相互關系進行運動校核及相關的力學分析。