15t自調式焊接滾輪架設計

喜歡這套資料就充值下載吧。資源目錄里展示的都可在線預覽哦。下載后都有，請放心下載，文件全都包含在內，有疑問咨詢QQ:414951605 或 1304139763 摘要 隨著焊接技術的高速發展，對焊接生產的機械化和自動化提出了越來越高的要求。焊接裝備就是在焊接生產中與焊接工序相配合,有利于是實現焊接生產機械化,自動化,有利于提高裝配焊接質量,促使焊接生產過程加速進行的各種輔助裝置和設備。焊接機械設備的需求量也越來越大。焊接機械設備的需求量也越來越大。焊接滾輪架設備正是為了滿足市場需求而設計生產的。焊接滾輪架是借助主動滾輪與焊件之間的摩擦力來帶動焊接旋轉的變?yōu)闄C(jī)械。焊接滾輪架主要用于筒形焊件的裝配與焊接。焊接滾輪架按結構形式分為兩類：第一類是長軸式滾輪架。第二類是組合式滾輪架。按調節方式分為自調式、非自調式。自調式焊接滾輪架可以根據焊件直徑自動調整滾輪架的間距。本文主要是對15t自調式焊接滾輪架進行設計，并對軸、鍵等主要構件進行校核。結果表明各主要部件符合要求。該滾輪架結構簡單，使用方便靈活，對焊件的適應性很強。設計中充分考慮了滾輪架的合理性和經濟性等因素。 關鍵詞：焊接 工裝夾具 滾輪架 ABSTRACT As the welding technology developed, more and more higher quality is needed to mechanization and automation of welding production and welding process. Welding equipment is a machine which is used in welding production and welding process, and it is conducive to welding production mechanization and automation, to improving assembly welding-quality. Then it could speed up the process of welding production of the various assistive devices and equipment. Welding equipment’s requirement is in big mass. Welding roller is designed for the requirement of the market. Welding roller is used initiative and welding pieces of the wheel between the Mount relay driven welding rotating mechanical deformation. Welding roller stands for the main pieces of tube welding and welding assembly. Welding roller standing by structural form is divided into two categories: the first category is long axis-wheel frame, the second category is modular roller frame. According to the regulating mode is divided into self-adjusting, non-self-adjusting. Self-adjusting welding roller can adjusting the distance of the welding roller according to the diameter of the work. In this paper, fifteen tons of self-adjusting welded wheel for the design, as well as axial, bond and other main component of checking. The results showed that the main component to meet the requirements. The roller frame structure is simple, flexible, adaptive welded pieces of a strong, which is the most widely used form of the structure. And it could be fully considered the roller frame reasonable and economic, and other factor. KEY WORDS: weld frock clamp turning rolls