電氣工程及其自動化專業 外文文獻 英文文獻 外文翻譯 plc方面【教學知識】

《電氣工程及其自動化專業 外文文獻 英文文獻 外文翻譯 plc方面【教學知識】》由會員分享，可在線閱讀，更多相關《電氣工程及其自動化專業 外文文獻 英文文獻 外文翻譯 plc方面【教學知識】（11頁珍藏版）》請?jiān)谘b配圖網上搜索。

1、 1、 外文原文（復印件） A: Fundamentals of Single-chip Microcomputer The single-chip microcomputer is the culmination of both the development of the digital computer and the integrated circuit arguably the tow most significant inventions of the 20th century [1]. These tow types of architectu

2、re are found in single-chip microcomputer. Some employ the split program/data memory of the Harvard architecture, shown in Fig.3-5A-1, others follow the philosophy, widely adapted for general-purpose computers and microprocessors, of making no logical distinction between program and data memory as i

3、n the Princeton architecture, shown in Fig.3-5A-2. In general terms a single-chip microcomputer is characterized by the incorporation of all the units of a computer into a single device, as shown in Fig3-5A-3. Program memory Input& Output unit CPU Data memory

4、 Fig.3-5A-1 A Harvard type Input& Output unit CPU memory Fig.3-5A-2. A conventional Princeton computer Timer/ Counter System clock External Timing components Serial I/O ROM Rese

5、t Prarallel I/O RAM Interrupts CPU Power Fig3-5A-3. Principal features of a microcomputer Read only memory (ROM).ROM is usually for the permanent, non-volatile storage of an applications program .Many microcomputers and microcontro

6、llers are intended for high-volume applications and hence the economical manufacture of the devices requires that the contents of the program memory be committed permanently during the manufacture of chips . Clearly, this implies a rigorous approach to ROM code development since changes cannot be ma

7、de after manufacture .This development process may involve emulation using a sophisticated development system with a hardware emulation capability as well as the use of powerful software tools. Some manufacturers provide additional ROM options by including in their range devices with (or intende

8、d for use with) user programmable memory. The simplest of these is usually device which can operate in a microprocessor mode by using some of the input/output lines as an address and data bus for accessing external memory. This type of device can behave functionally as the single chip microcomputer

9、from which it is derived albeit with restricted I/O and a modified external circuit. The use of these ROMless devices is common even in production circuits where the volume does not justify the development costs of custom on-chip ROM[2];there can still be a significant saving in I/O and other chips

10、compared to a conventional microprocessor based circuit. More exact replacement for ROM devices can be obtained in the form of variants with 'piggy-back' EPROM(Erasable programmable ROM )sockets or devices with EPROM instead of ROM 。These devices are naturally more expensive than equivalent ROM devi

11、ce, but do provide complete circuit equivalents. EPROM based devices are also extremely attractive for low-volume applications where they provide the advantages of a single-chip device, in terms of on-chip I/O, etc. ,with the convenience of flexible user programmability. Random access memory (

12、RAM).RAM is for the storage of working variables and data used during program execution. The size of this memory varies with device type but it has the same characteristic width (4,8,16 bits etc.) as the processor ,Special function registers, such as stack pointer or timer register are often logical

13、ly incorporated into the RAM area. It is also common in Harard type microcomputers to treat the RAM area as a collection of register; it is unnecessary to make distinction between RAM and processor register as is done in the case of a microprocessor system since RAM and registers are not usually phy

14、sically separated in a microcomputer . Central processing unit (CPU).The CPU is much like that of any microprocessor. Many applications of microcomputers and microcontrollers involve the handling of binary-coded decimal (BCD) data (for numerical displays, for example) ,hence it is common to find th

15、at the CPU is well adapted to handling this type of data .It is also common to find good facilities for testing, setting and resetting individual bits of memory or I/O since many controller applications involve the turning on and off of single output lines or the reading the single line. These lines

16、 are readily interfaced to two-state devices such as switches, thermostats, solid-state relays, valves, motor, etc. Parallel input/output. Parallel input and output schemes vary somewhat in different microcomputer; in most a mechanism is provided to at least allow some flexibility of choosing which

17、 pins are outputs and which are inputs. This may apply to all or some of the ports. Some I/O lines are suitable for direct interfacing to, for example, fluorescent displays, or can provide sufficient current to make interfacing other components straightforward. Some devices allow an I/O port to be c

18、onfigured as a system bus to allow off-chip memory and I/O expansion. This facility is potentially useful as a product range develops, since successive enhancements may become too big for on-chip memory and it is undesirable not to build on the existing software base. Serial input/output .Serial co

19、mmunication with terminal devices is common means of providing a link using a small number of lines. This sort of communication can also be exploited for interfacing special function chips or linking several microcomputers together .Both the common asynchronous synchronous communication schemes requ

20、ire protocols that provide framing (start and stop) information .This can be implemented as a hardware facility or U(S)ART(Universal(synchronous) asynchronous receiver/transmitter) relieving the processor (and the applications programmer) of this low-level, time-consuming, detail. t is merely necess

21、ary to selected a baud-rate and possibly other options (number of stop bits, parity, etc.) and load (or read from) the serial transmitter (or receiver) buffer. Serialization of the data in the appropriate format is then handled by the hardware circuit. Timing/counter facilities. Many application of

22、 single-chip microcomputers require accurate evaluation of elapsed real time .This can be determined by careful assessment of the execution time of each branch in a program but this rapidly becomes inefficient for all but simplest programs .The preferred approach is to use timer circuit that can ind

23、ependently count precise time increments and generate an interrupt after a preset time has elapsed .This type of timer is usually arranged to be reloadable with the required count .The timer then decrements this value producing an interrupt or setting a flag when the counter reaches zero. Better tim

24、ers then have the ability to automatically reload the initial count value. This relieves the programmer of the responsibility of reloading the counter and assessing elapsed time before the timer restarted ,which otherwise wound be necessary if continuous precisely timed interrupts were required (as

25、in a clock ,for example).Sometimes associated with timer is an event counter. With this facility there is usually a special input pin ,that can drive the counter directly. Timing components. The clock circuitry of most microcomputers requires only simple timing components. If maximum performance i

26、s required,a crystal must be used to ensure the maximum clock frequency is approached but not exceeded. Many clock circuits also work with a resistor and capacitor as low-cost timing components or can be driven from an external source. This latter arrangement is useful is external synchronization of

27、 the microcomputer is required. WORDS AND TERMS culmination n.頂點 spilt adj.分離的 volatile n. 易變的 commit v.保證 albeit conj.雖然 custom adj.定制的 variant adj.不同的 piggy-back adj.背負式的 socket n. 插座 B:PLC[1] PLCs (programmable logical controller) face ever more complex challenges these

28、days . Where once they quietly replaced relays and gave an occasional report to a corporate mainframe, they are now grouped into cells, given new job and new languages, and are forced to compete against a growing array of control products. For this year's annual PLC technology update ,we queried PLC

29、 makers on these topics and more . Programming languages Higher level PLC programming languages have been around for some time ,but lately their popularity has mushrooming. "As Raymond Leveille, vice president & general manager, Siemens Energy &Automation .inc; Programmable controls are being use

30、d for more and more sophisticated operations, languages other than ladder logic become more practical, efficient, and powerful. For example, it's very difficult to write a trigonometric function using ladder logic ."Languages gaining acceptance include Boolean, control system flowcharting, and such

31、function chart languages as Graphcet and its variation .And there's increasing interest in languages like C and BASIC. PLCs in process control Thus far, PLCs have not been used extensively for continuous process control .Will this continue? "The feeling that I've gotten," says Ken Jannotta, manger

32、, product planning, series One and Series Six product ,at GE Fanuc North America ,'is that PLCs will be used in the process industry but not necessarily for process control." Several vendors -obviously betting that the opposite will happen -have introduced PLCs optimized for process application .Ri

33、ch Ryan, manger, commercial marketing, Allen-bradley Programmable Controls Div., cites PLCs's increasing use such industries as food ,chemicals ,and petroleum. Ryan feels there are two types of applications in which they're appropriate. "one," he says," is where the size of the process control syste

34、m that's being automated doesn't justify DCS[distributed control system].With the starting price tags of chose products being relatively high, a programmable controller makes sense for small, low loop count application .The second is where you have to integrate the loop closely with the sequential l

35、ogical .Batch controllers are prime example ,where the sequence and maintaining the process variable are intertwined so closely that the benefits of having a programmable controller to do the sequential logical outweighs some of the disadvantages of not having a distributed control system." Bill Ba

36、rkovitz, president of Triconex, predicts that "all future controllers that come out in the process control system business will embrace a lot of more PLC technology and a lot more PLC functionality than they ever did before ." Communications and MAP Communications are vital to an individual automa

37、tion cell and to be automated factory as a whole. We've heard a lot about MAP in the last few years ,and a lot of companies have jumped on the bandwagon.[2]Many, however, were disappointed when a fully-defined and completed MAP specification didn't appear immediately .Says Larry Komarek: "Right now

38、, MAP is still a moving target for the manufacturers, a specification that is not final .Presently, for example. people are introducing products to meet the MAP2.1standard .Yet2.1-based products will be obsolete when the new standard for MAP3.0 is introduced." Because of this, many PLC vendors are

39、holding off on full MAP implementations. Omron, for example, has an ongoing MAP-compatibility program;[3]but Frank Newburn, vice president of Omron's Industrial Division ,reports that because of the lack of a firm definition ,Omron's PLCs don't yet talk to MAP. Since it's unlikely that an individua

40、l PLC would talk to broad MAP anyway, makers are concentrating on proprietary networks. According to Sal Provanzano, users fear that if they do get on board and vendors withdraw from MAP, they'll be the ones left holding a communications structure that's not supported. Universal I/O While there ar

41、e concerns about the lack of compatible communications between PLCs from different vendors, the connection at the other end-the I/O-is even more fragmented .With rare exceptions, I/O is still proprietary .Yet there are those who feel that I/O will eventually become more universal .GE Fanuc is hoping

42、 to do that with its Genius smart I/O line. The independent I/O makers are pulling in the same direction. Many say that I/O is such a high-value item that PLC makers will always want to keep it proprietary .As Ken Jannotta, says: "The I/O is going to be a disproportionate amount of the hardware sa

43、le. Certainly each PLC vendor is going to try to protect that. "For that reason, he says, PLC makers won't begin selling universal I/O system from other vendor. "if we start selling that kind of product, "says jannotta, "what do we manufacture?" With more intelligent I/O appearing, Sal Provanzano f

44、eels this will lead to more differentiation among I/O from different makers. "Where the I/O becomes extremely intelligent and becomes part of the system, "he says, "it really is hard to define which is the I/O and which is CPU. It really CPU, if you will, is equally integrated into the system as the

45、 I/O." Connecting PLC I/O to PCs While different PLCs probably will continue to use proprietary I/O, several vendors make it possible to connect5 their I/O to IBM PC-compatible equipment. Alle-bradeley, Could, and Cincinnati Milacron already have, and rumor has it that GE is planning something a

46、long these same lines .[4]Bill Ketelhut, manage of product planning at GE Fanuc North America ,sees this sort of thing as alternative to universal I/O."I think the trend ,instead of toward universal I/O, will be multiple host interface ," he says .Jodie Glore ,director of marking, Square D Automatio

47、n Products, Views it as another indication that PLCs are, and have been for some time, industrial computers. PLCs VS PCs If the IBM 7552, the Action Instruments BC22,and other computers are appearing on the factory floor, won't this mean new competition for PLCs? Rich Ryan: "There are some control

48、 functions that are better jobs for computers. Programmable controllers have been forced to fit into those applications. "Yet, the majority of vendors we surveyed don't like the "PC invasion" will pose a problem for them .Most said that PLCs and PCs are enough apart in architecture that they will us

49、ually do the control. They don't feel that PCs will take jobs from PLCs just because PLC I/O modules can now be connected to PCs; they believe this simply means that PLCs and PCs will be able to share the same data. "There are inherent architectural differences between a general purpose computer,"

50、says Rich Ryan, "and a programmable controller .There are hardware constructs built into almost every manufacture's programmable controller today that customize the hardware to run ladder logic and to solve machine code. "One fundamental difference he cites is called state of the machine .Ryan: "Whe

51、n you shut the machine off, or interrupt the cycle, or you jump to another spot in the cycle, programmable controllers inherently remember the state of the machine: what the timers were, what the counters were ,what the states of all the latches were .Computers don't inherently do that." WORDS A

52、ND TERMS bet v.確信 optimized n.優化程序 corporate adj.共同的 mushroom v.迅速發展 trigonometric function 三角函數 vendor n.廠商 tag n.標簽 smart adj.智能型的 compatible adj.兼容的 2、 外文資料翻譯譯文 單片機基礎 單片機是電腦和集成電路發展的巔峰，有據可查的是他們也是20世紀最有意義的兩大發明。 這兩種特性在單片機中得到了充分的體現。一些廠家用這兩種特性區分程序內存和數據內存在硬件中的特性，如圖3-5A-1，依據同樣的原

53、理廣泛的適用于一般目的的電腦和微電腦，一些廠家在程序內存和數據內存之間不區分的像Princeton特性，展示如圖3-5A-2. 只讀存貯器(ROM). ROM是通常的永久性的，非應用程序的易失性存儲器。不少微機和單片機用于大批量應用，因此，經濟的設備制造要求的程序存儲器的內容是在制造期間永久性的刻錄在芯片中，這意味著嚴謹?shù)姆椒ǎ驗樾薷腞OM代碼不能制造之后發展。這一發展過程可能涉及仿真,使用硬件仿真功能以及強大的軟件工具使用先進的開發系統。 一些制造商在其提供的設備包括的范圍（或擬使用）用戶可編程內存.其中最簡單的通常是設備能夠運行于微處理器模式通過使用一些輸入/輸出作為地址線額外的RO

54、M選項和數據總線訪問外部內存.這種類型的設備可以表現為單芯片微型計算機盡管有限制的I / O和外部修改這些設備的電路.小內存裝置的應用是非常普遍的在永久性內存的制造中 [2];但仍然可以在我節省大量成本I/ O和其它芯片相比，傳統的基于微處理器電路.更準確的ROM設備更換，可在與'形式變種背馱式'EPROM（可擦除可編程只讀存儲器）插座或存儲器，而不是ROM器件。這些器件自然價格比同等ROM設備貴，但不提供完整的等效電路.EPROM的設備也非常有吸引力對于低容量應用中，他們提供的單芯片器件的優勢，在以下方面的板載I / O等，在靈活的用戶可編程帶來的便利。 隨機存取存儲器（RAM

55、）。RAM用于變量和工作在程序使用該存儲器的執行.隨數據存儲設備的大小不同類型而有所不同，但具有相同的特征寬度（4,8,16 比特等）作為處理器。特殊功能寄存器，如棧指針或定時器寄存器，往往邏輯納入內存區域.它也在型微電腦的硬件中做集中內存，它是不必要的區分內存和處理器之間的區別在通常不物理上分開的微機中。 中央處理單元（CPU）。CPU是很象微型電子計算機和微控制器的任何微電腦.許多微電腦和微控制器涉及到二進制編碼(十進制處理（BCD）的數據為例）數字顯示，因而，常?？梢园l(fā)現該CPU是很適合處理這種類型的數據。對設施良好與否進行的測試，設置和重置單個位的內存或I / O控制器的應用程序，也

56、是常見的因?yàn)樵S多涉及打開和關閉的單輸出線或在單線.這些線很容易連接到二進制的設備，如開關，恒溫器，固態繼電器，閥門，電機等 并行輸入/ 輸出.并行輸入和輸出的計劃有所不同，在不同的微機，在大多數設立一個機制，至少選擇讓其中一些引腳輸出，一些引腳輸如是非常靈活的。這可能適用于所有或端口.有些I / O線直接連接到適當?shù)脑O(shè)備，例如，熒光顯示器，也可以提供足夠的電流，使接口和其他設備直接相連.一些設備允許一個I / O端口,其他組件將作為系統總線配置為允許片外存儲器和I / O擴展。這個設施是潛在有用的一個產品系列的發展，因?yàn)檫B續增強可能成為太上存儲器，這是不可取的，不是建立在現有的軟

57、件基礎上的。 串行輸入/輸出。串行通信是指與終端設備的鏈接使用少量的通訊線.這種通訊也可利用特殊的接口連接功能芯片使幾個微型機連在一起。雙方共同異步同步通信方案要求的規則提供成幀（啟動和停止）的信息。這可以作為一個硬件設施或U（擰）藝術（通用執行（同步）異步接收器/發送器）減輕處理器（和應用程序）的這種低層次的確費時.它也只需要選擇一個波特率及其他可能的選擇（停止位，奇偶校驗等）和負載號碼（或讀?。?，串行發送器（或接收）的緩沖器.進行適當?shù)母袷降臄?shù)據串行處理，然后由硬件電路完成。 定時/計數器設施。許多應用的單片機需要對過去的真實時間準確的評價。這可以由每個程序中的執行時間分支認真評估

58、，但除最簡單的程序外，他的工作效率不高。首選方法是使用計時器電路，能獨立計算精確的時間增量，并生成一個預設的時間后中斷的時間。這種類型的定時器通常在所要求的數量可重載中應用。計時器然后減少此值產生中斷或設置標記時，計數器到達零.更好的計時器有自動加載初始值的功能。這將緩解重新加載計數器和評估所用的時間，計時器重新啟動之前這是必要的。有時候與定時器相關的是一個事件計數器。這個設備通常有一個特殊的輸入引腳，可直接驅動計數器。 定時元件。大多數微型計算機時鐘電路只需要簡單的計時元件.如果要求最高性能，必須使用晶體以確保最大時鐘頻率接近，但不會超出。許多時鐘電路，還具有電阻和低電容工作成本定時元件，

59、也可以從外部源驅動。這后一種安排是有用的在微機外部同步是必需的時候。 B:PLC[1] 今天的PLC（可編程邏輯控制器）將面對日益復雜的挑戰。一旦他們悄悄地取代繼電器，偶爾向主機報告，如果他們將他們比作細胞，賦予新的工作和新的語言，將被迫和大量的控制產品競爭。對于今年的年度PLC技術的更新，我們對PLC的制造商會就這些主題提出更多問題. 編程語言 更高水平的PLC編程語言已經推行有一段時間了，但最近的流行，如雨后春筍般。正如雷蒙德萊韋耶，副總裁兼總經理，西門子能源和自動化公司，可編程控制正在為更復雜的操作使用，梯形邏輯比語言變得更加實際，有效和強大的。舉例來說，很難寫三角函數使用梯形

60、邏輯?！罢Z言為人們所接受，包括布爾，控制系統流程圖，這種功能圖及其變化圖表語言。而且有越來越多像C和BASIC語言的興趣。” 在過程的PLC控制 到目前為止，PLC的沒有大量用于連續過程控制，會繼續嗎？“我感覺到了，PLC將用于過程工業，但不一定過程控制?！?Jannotta說。 幾個供應商，顯然是把賭注押在相反會發生，已經實行了PLC的應用優化的過程。富瑞安的經理認為PLC將越來越多地使用食品等行業，化工，石化.Ryan認為有兩種類型的應用程序中，他們是合適的?！爸?，”他說，“是其中的過程控制系統，目前已被沒有理由自動化DCS的大小[分布式控制系統]隨著價格標簽開始。產品的選擇是比較

61、高，可編程控制器為小，低環數的應用意義。第二種是你必須融入順序邏輯。批次控制循環密切合作是最好的例子，那里的順序和維持過程變量是交織在一起的密切合作，使擁有一個可編程控制器的邏輯順序做的好處遠遠超過了不具有分布式控制系統的一些缺點?！? Bill Barkovitz， Triconex的總統，預言：“今后所有的控制器在過程控制系統的業務將引用更多的PLC技術， PLC功能比以往任何時候都要多?！? 通信和規范 在整體上通信是至關重要的個人自動化單元對自動化工廠來說。我們聽說了很多規范在過去數年，許多公司都紛紛跟進。[2]但是，不少人失望的發現完成地圖規范并沒有立即出現。拉里科馬雷克說：“現在

62、，規范仍然是一個移動目標，規范沒有最終決定，對于制造商。目前，正在推出的產品樣本.人們使其產品滿足MAP2.1標準。然而，新標準MAP3.0被引進時，MAP2.1為基礎的產品將被淘汰時?！? 正因?yàn)槿绱?，許多PLC廠商正在制定完整的規范. 例如Omron，擁有一個完整的兼容程序; [3]，但弗蘭克紐伯恩，副歐姆龍工業部總裁，報告說，由于缺乏公司的定義，歐姆龍的PLC還談不上規范。 由于不太可能將個人的PLC廣泛的交談，制造商更專注于專有的網絡.按照薩爾Provanzano說法，用戶擔心，如果他們不從規則上和供應商妥協，他們將要加大對通信結構的不支持。 通用的I / O 然而大多

63、數PLC的兼容問題不同廠商的溝通不夠，在另一端連接的I / O問題，更是支離破碎的。除了少數例外，I / O是仍然專有技術。然而，誰是那些感覺的I / O最終將成為更具有普遍性。GE Fanuc的希望這樣做與天才智能I / O線.各個獨立I / O制造商都在同一方向進發。 許多人說，I / O是這樣一個高價值項目， PLC制造商將永遠希望保持它的專有性。由于肯Jannotta。說：“ I / O將在硬件銷售中不成比例。當然每個PLC供應商將試圖保護這一點。”出于這個原因，他說，PLC的制造商將不會開始銷售通用I / O和其他廠商的系統?！叭绻覀冮_始銷售該產品的實物，那我們還有什么可生產的？

64、” Jannotta說道 隨著更多智能I / O出現，薩爾Provanzano認為在不同的制造商中間這將導致更多的分化?！澳睦锏腎 / O變得非常聰明，并成為系統的一部分真的很難定義，哪些是I / O，哪些是CPU.隨著分布式的發展，如果你愿意，CPU也同樣可以納入作為I / O的系統” PLC的 I / O和個人電腦的連接 雖然不同的PLC廠商可能會繼續用專有的I / O，但一些廠商使I / O連接到IBM PC這樣的兼容設備成為可能.Alle - bradeley和辛辛那提米拉克龍公司已經擁有，并有傳言說，通用的電氣計劃將沿著同樣的思路?？颂貭柡?， GE Fanuc北美的產品規劃

65、經理，認為是I/ O的普及“我想多個主機接口將代替I/O的趨勢，”他說。朱迪格洛爾，市場經理，Square D Automation Products，將PLC看做是工業電腦。 PLC VS電腦 如果IBM 7552，行動儀器BC22，和其他計算機出現在工廠，這意味著不會對PLC的新的競爭？富瑞安：“有一些控制功能，可用于電腦.可編程程序控制器更好的工作已被迫適應這些應用?！叭欢谖覀冋{(diào)查的廠商多數不認為“個人電腦入侵”將對他們產生問題。大多表示PLC和PC結構上的差別決定他們不同的作用，PC將主管通訊和管理，PLC則進行控制，他們相信這只是意味著，PLC和個人電腦將能夠共享相同的數據。 富瑞恩說：“通用的計算機內在結構不同，可編程控制器硬件結構有內置到幾乎每一個制造商的可編程控制器。今天定制的硬件來運行梯形邏輯，解決機器代碼。”在根本的區別上，他引用了一個稱呼“機器狀態”。富瑞安說：“當你關閉機器，或中斷周期，或者跳轉到另一個周期，現場可編程控制器本身記得機器的狀態：定時器狀態是什么，計數器狀態是什么，鎖存的狀態是什么,但計算機本身不這樣做?！? 11 教學-材料