購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。。【注】：dwg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
摘要
本文首先綜合比較了各種類型輸送機的特點，根據實際情況選用了中單鏈型刮板輸送機。而后，對中單鏈型刮板輸送機進行了總體結構設計。對機頭傳動裝置、過渡槽、中部槽、刮板鏈、刮板、鏈輪、機尾等主要部件進行了技術分析和結構設計，完成了中單鏈型刮板輸送機的整體設計。此次設計的中單鏈型刮板輸送機左右兩側對稱，可以在兩側壁上安裝減速器，以適應左、右采煤工作面的需要。另外，可以很容易將機尾改裝成機頭，而適應各種特殊情況。此次設計的中單鏈型刮板輸送機的特點是結構簡單,受力均勻,運行平穩,摩擦阻力小,溜槽利用率高，彎曲性能好,不易出現堵塞，具有很強的適應性。
關鍵詞：刮板輸送機；中部槽；圓環鏈
Abstract
This article first synthesized has compared each kind of type conveyer characteristic, has selected center simple chain according to the actual situation the scraper conveyer. But after, the scraper conveyer has carried on the overall structural design to center simple chain. To the nose transmission device, the aqueduct, the middle trough, the scraper chain, the scraper, the chain wheel, the airplane tail and other major component has carried on the technical analysis and the structural design, has completed center simple chain the scraper conveyer overall design. This design center simple chain about the scraper conveyer two sides are symmetrical, may install the reduction gear on two sidewalls, by left meets, the right mining coal working surface need. Moreover, it may very easily reequip the airplane tail the nose, but adapts each kind of peculiar circumstance. This design of center simple chain of the scraper conveyer characteristic includes: the structure is simple, the stress is even, moves steadily, the friction drag is small, the chute use factor high, the curving performance is good, It is not easy to appear stops up, has the very strong compatibility.
Key Words: Scraper Conveyer; Middle Trough; Round Link Chain