購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
限位板沖壓成形工藝與模具設計
摘 要：本設計題目為限位板沖裁模，體現了典型沖裁模的設計要求、內容及方向，有一定的設計意義。通過對該模具的設計，加強了設計者對沖裁模設計基礎知識的理解和運用，為設計更復雜的沖裁模具做好了鋪墊。
本設計運用沖裁工藝及模具設計的基礎知識，首先分析了板材的性能要求，為選取模具的類型做好了準備；然后計算了沖裁件的沖裁力，便于選取壓力機噸位及確定壓力機型號；最后分析了沖裁件的特征，便于確定模具的設計參數、設計要點及卸件裝置。
本設計采用了沖孔—落料級進模成形墊片。成形原理可劃分為兩個階段：首先沖孔凸模與凹模共同作用先沖出四個30mm的孔，而后利用第一步?jīng)_出的30mm的孔做精確定位使外形凸模與凹模共同作用使工件落料成形。
關鍵詞：限位板、 壓力機、 級進模具、 沖孔、 落料
Stamping process and die design of limit plank
Abstract:This design topic hurtles to cut a mold for the limit plank, body now the typical model be blunt to cut design request, contents and direction of mold, there is certain design meaning.Pass the design to that molding tool, strengthenned a design to comprehension and usage which hurtles to cut the mold design foundation knowledge, for design more complicated of blunt cut a molding tool to have done cushion.
This design usage is blunt to cut the foundation knowledge of craft and molding tool design, the function which analyzed a plank material first request, have done preparation for the type which selects by examinations a molding tool;Then computed to hurtle to cut a piece of blunt cut dint, easy to selection pressure machine tonnage and assurance pressure model number;Finally analyzed blunt cut the characteristic of piece, easy to assurance molding tool of design parameter, design important point and unload a device.
This design adopted blunt bore-fall to anticipate class to enter a mold to take shape a mat slice.Take shape the principle can divide the line to two stages:Blunt bore convex mold rushes out 4 first with cave mold common function first the bore with 30 mms, and then make use of square one to rush out of the bore with 30 mms do an accurate fixed position to make the shape convex mold and cave mold common function to make a work piece to fall to anticipate to take shape.
Keyword:The limit plank, pressure machine, class enters a molding tool, hurtle bore and fall to anticipate