459 S195柴油機機體三面精鏜組合機床總體設計及夾具設計

459 S195柴油機機體三面精鏜組合機床總體設計及夾具設計,s195,柴油機,機體,三面精鏜,組合,機床,總體,整體,設計,夾具 鹽城工學院機械工程系畢業設計說明書摘 要夾具設計是機械制造廠里的一種工藝裝備，有機床夾具，焊接夾具，裝配夾具，檢驗夾具等，一般的機床夾具是作為機床的輔助機構設計的，而組合機床夾具是作為機床的主要組成部分，其設計工作是整個組合機床設計的重要部分之一。組合機床夾具應便于實現定位和夾壓的自動化，并有動作完成的檢查信號。夾具體在機床上的安裝都是通過夾具體上的安裝基面與機床上的相應表面的接觸或配合實現的。當夾具體在機床工作臺上安裝時，夾具的重心應盡量低，重心越高則支承面應力越大，夾具底面四邊應凸出，使其接觸良好，或底部設置四個支腳。當夾具體在機床主軸上安裝時，夾具安裝基面與主軸相應表面應有足夠的配合精度，并保證安裝穩定可靠。關鍵詞: 夾具設計 組合機床 總體設計 S195 柴油機三面精鏜組合機床總體設計及夾具設計AbstractTongs design is a kind of craft that machine manufactory in equip, organism bed tongs, welding tongs, assemble tongs, examination tongs etc., the general machine bed tongs is an assistance to be used as the machine bed organization design of, but the combination machine bed tongs is an importance to be used as the machine bed to constitute the part primarily, its design work is whole combination machine bed design part of a. Combination the machine bed tongs shoulds be easy to realize fixed position with clip the automation that press, also the check signal that action complete. The tongs all passes in the machine the gearing on the bed what tongs the gearing on realizes with superficial contact in the cowgirl on the bed in machine or matches.When the tongs installs in the machine bed work on the stage, the center of gravity of the tongs should be as far as possible low, center of gravity the more high an accepts should the dint is more big, the tongs bottom four directions should bulge, make its contact good, or the bottom establishes four a feets.When the tongs installs on the machine bed principal axis, the tongs install the to should have the enough match accuracy with principal axis cowgirl surface, and guarantee the gearing the stability dependable.Keywords: tongs combination the machine bed clip the automation