【溫馨提示】壓縮包內含CAD圖有下方大圖片預覽，下拉即可直觀呈現眼前查看、盡收眼底縱觀。打包內容里dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，所見才能所得，請見壓縮包內的文件及下方預覽，請細心查看有疑問可以咨詢QQ：11970985或197216396
DEUTZ1013柴油機曲軸加工工藝規程設計
總計：畢業論文：
表 格：
插 圖：
摘 要
我國的機械制造業水平已經得到長足的發展，一個自立的機械工業體系基本形成。但是與發達國家相比，工業水平還存在階段性的差距。
主要完成有設計任務：在已有的知識基礎上，編制出合理的曲軸機械加工工序；選擇其中一道工序進行夾具設計；進行說明書的撰寫工作。在工序編排的過程中，充分考慮各方面影響因素、結合中國機械行業現行的技術及裝備條件；在夾具設計過程中充分利用了進制圖軟件的優勢對夾具進行了表達。
本次設計對重點工序進行說明，對夾具進行了分析。并配有完整的工序卡，主要對加工工藝路線進行擬訂對重點加工工序方法進行說明包括粗加工，半精加工，精加工，熱處理。
關鍵詞：夾具；工序；制圖；工藝
I
ABSTRACT
Until now .the level of machine building industry in china has been well developed .and a self dependent machine building industry system has been basically formed .however ;compared with developed countries the industry level still have phased gap .Chinese machine building industry shoulders heavy responsibilities.
The task of design is mainly completed as follows .on the basis of existing knowledge, the reasonable cranked axle manufacturing procedures are worked out one of the machine is chosen to proceed the grip design ;
The descriptive manual is composed .in the process of compiling the procedures , active in all directions are fully considered to combine with the existing and equipment conditions of Chinese machine building industry .In the process of grip design , car to graph soft is fully used to express the grip.
The major procedures are des cribbed in this design and the completed route chart is attached the design of the crankshaft main processing line elaboration ,identified process of completing a fixture card and an analysis .
Keywords: grip；procedures；cartography；technology
II
目 錄
摘 要 I
ABSTRACT II
1 緒論 1
1.1 柴油機工作原理 1
1.2 柴油機曲軸的結構特點 2
2 設計任務 4
2.1 DEUTZ1013參數說明 4
2.2 DEUTZ1013曲軸作用 4
2.3 DEUTZ1013曲軸結構特點 4
2.4 DEUTZ1013曲軸技術要求 5
3 DEUTZ1013柴油機曲軸工藝路線 7
3.1 批量、年產量確定 7
3.2 毛坯選擇 8
3.3 定位基準 8
3.4 工藝路線 10
3.5 計算余量及設計毛坯圖 13
3.6 加工裝備選擇及安排 15
3.7 切削用量與基本時間確定 19
4 機床夾具 24
4.1 夾具分析 24
4.2 夾具裝配 28
4.3 夾具經濟性能 28
5 檢驗零件 30
5.1 氣動量儀 30
5.2 氣動卡規 30
5.3 檢驗夾具 31
6 結 論 32
參 考 文 獻 33
附錄1：外文翻譯 34
附錄2：外文原文 45
致 謝 51