I 摘 要 隨著國內外汽車業的蓬勃發展 汽車維修行業也隨之得到大力發展 汽車舉升機 是現代汽車維修作業中必不可少的設備 其中舉升機的安全可靠性 使用方便是大家 一直以來研究的重點 本設計主要圍繞剪是舉升機進行設計研究的 主要因為剪刀式 舉升機使用方便 占地空間較小 受到很多實力雄厚的特約維修站的歡迎 這也是未 來舉升機的發展方向 本文首先對剪刀式舉升機的整體結構 各部件尺寸 運動形式 進行確定 建立力學模型 并對每個舉升臂進行受力分析 確定結構和選材的合理性 之后建立 Pro E 與 ANSYS 的集成接口 將利用 Pro E 三維建模后的主要部件導入有限 元軟件 ANSYS 中進行汽車剪刀式舉升機的強度 剛度 穩定性及動態特性等方面的計 算機有限元分析與研究 找出結構強度的不合理處 進行結構優化設計和改進 將改 進和優化后的結構反應到 Pro E 三維建模中 完成整機裝配 通過有限元軟件 ANSYS 對剪刀式舉升機進行分析 可以代替剪刀式舉升機物理樣機的前期試驗 提供更多的 理論參考 進一步提高汽車剪刀式舉升機的穩定性和可靠性 關鍵詞 剪刀式舉升機 力學模型 Pro E 三維建模 有限元分析 結構設計 II ABSTRACT At home and abroad with the rapid development of automobile industry car repairindustry have also been vigorously the development of Hyundai Motor vehicle lift is essential for maintenance of equipment operations which lift the security and reliability ease of use is that we have been Since the focus of the study The main focus of this design is shear lift design study Scissors type lift mainly because of ease of use occupying less space subject to a number of powerful special welcome service station which is the future direction of development of lift In this paper scissors type lift to the overall structure thecomponents of size to determine the form of movement the establishment of the mechanical model and stress analysis of each lifting arm to determine the structure and material selection reasonable After the establishment of Pro E integrated with the ANSYS interface will use the Pro E after the three dimensional modeling of the main components into finite element software ANSYS in scissors type vehicle lift of strength stiffness stability and dynamic characteristics etc finite element analysis and computer studies to find out the structural strength of the unreasonable the structural optimization of the design and improvement Will be improved and optimized the structure of the response to the Pro E three dimensional modeling the complete machine assembly Through the finite element software ANSYS to analyze the scissors type lift can replace the scissors type lift the pre physical prototype testing to provide more theoretical reference scissors style cfurther enhance the stability and reliability of lift Key words Scissors type lift Mechanics Modeling Pro E three dimensional modeling Finite Element Analysis Structural Optimization