帶鋼跑偏機的分析設計【含CAD圖紙、說明書】

帶鋼跑偏機的分析設計【含CAD圖紙、說明書】,含CAD圖紙、說明書,帶鋼,跑偏機,分析,設計,cad,圖紙,說明書,仿單 摘 要 目前，隨著電腦技術，液壓控制技術的發展，電液伺服控制系統也出現了突飛猛進的成果。 帶鋼經過連續軋制或酸洗等一系列加工處理后須卷成一定尺寸的鋼卷，由于輥系的偏差及帶材厚度不均和板材不齊等種種原因，使帶材在作業線上產生隨機偏離現象。它使卷取機卷成的鋼卷邊緣不齊，直接影響包裝，運輸及降低成品率。所以有必要做防跑偏的控制系統，以提高工作效率。 本文在通過對帶鋼跑偏機理的分析設計，闡述了有關電液伺服控制系統元件的組成、結構、工作原理及發展?fàn)顩r，并運用現代電液伺服控制技術設計控制方案，采用MATLAB仿真，不斷調節使系統達到高效、穩定的自動跑偏控制的目的。 關鍵詞：電液伺服控制系統；仿真 Abstract Resently, as the development in computer technique and controlling in phyhical, the electro-hydraulic servo system system also appeared the progress by leaps and bounds result. steel through consecution ?t system or sour wash etc. a series processes after handling must a steel for certain size a deviation for, because of the department of 1 ? and take the material thickness not all with plank material not ?? etc. all kinds reasons, make take the material in the homework on-line produce to deviate the phenomenon with the machine.It makes a steel for taking first machine book an edge not ?? the direct influence packs, transporting and lowering the finished product rate.So there is necessity doing the control system that defend run to be partial to, toing increase the work efficiency. This text is passing to take the steel run the analysis that be partial to the mechanism designs, expatiating the relevant electricity liquid servocontrol system a purpose for constituting, construction, working principle and developping condition, and making use of modernly giving or get an electric shock liquid servocontrol technique designing controling project, adopting MATLAB imitating truely, continuously regulating making system attaining efficiently, stablely automatically running being partial to control. Key words: electro-hydraulic servo system system; imitating II